auto-RP
static RP
discovery mode
bootstrap protocol
第1题:
A. Configure a non-unique address on the loopback interface for use by the PIM RP.
B. Configure MSDP with the unique address (router ID) as the local address of the peer.
C. Configure MSDP with the non-unique address (router ID) as the local address of the peer.
D. Configure a unique address on the loopback interface, used as the PIM RP.
第2题:
A. The ip classless command is enabled by default in recent versions of IOS.
B. The ip classless command should only be enabled when static routing is being used instead of a routing protocol.
C. The ip classless command should be enabled by the network administrator whenever RIPv1 or IGRP is being used.
D. The ip classless command should be enabled by the network administrator whenever OSPF, RIPv2, or EIGRP is being used.
第3题:
A. auto-RP
B. static RP
C. discovery mode
D. bootstrap protocol
第4题:
Which type of domains is interconnected using Multicast Source Discovery Protocol?()
第5题:
A. It is a route to be used when the routing protocol fails.
B. It is a route configured by an ISP that sends traffic into a corporate network.
C. It is a route used when a packet is destined for a remote network that is not listed in the routing table.
D. It is a route manually configured for a specific remote network for which a routing protocol is not configured.
E. It is used to send traffic to a stub network.
第6题:
A. Stateful DHCP
B. Stateless DHCP
C. Stateless autoconfiguration
D. Neighbor Discovery Protocol
第7题:
A. The multicast sources must register with the RP to form the multicast distribution tree.
B. An RP is required only in networks running Protocol Independent Multicast dense mode (PIM DM).
C. The mu lticast receivers must register with the RP to form the multicast distribution tree.
D. An RP is required only in networks running Protocol Independent Multicast sparse mode (PIM SM).
E. An RP is required only in networks running Protocol Independent Mu lticast sparse - dense mode (PIM - SDM).
F. To form the multicast distribution tree, the multicast sources register with and the receivers join the RP.
第8题:
A. Static
B. Auto-RP
C. Dynamic-RP
D. Bootstrap router
E. Anycast-RP
第9题:
A.Statically defined RP
B.Bootstrap Router
C.Auto-RP
D.RP Discovery Protocol(RDP)
E.RP Helios
F.RPARP(RARP)
第10题:
In what PIM topology would you use MSDP within a single domain?()