the Device Settings tab in Printer Properties.
Device Manager by clicking on the printer’s driver and selecting Parameters.
Device Manager by selecting Upgrade Driver.
the Color Management tab in Printer Properties.
第1题:
A. A faulty memory module in the printer.
B. A postscript print job has been sent to the printer.
C. A large print job has been sent to the printer.
D. The printer firmware needs to be updated.
第2题:
You are the network administrator for Ezonexam.com. You configure a shared printer on a Windows 2000 Server computer. The printer connects to a Hewlett Packard JetDirect print device that uses DLC. This print device is on the same network segment as the server.
Six months later, you relocate the print device to a different network segment. Users report that they are able to send print jobs to the printer but that their print jobs no longer print.
You need to ensure that the printer and the print device are working properly. What should you do?
A.Configure the JetDirect print device to use DHCP.
B.Uninstall and reinstall the DLC protocol from the server.
C.Configure the printer and the JetDirect print device to use the LPR printing protocol.
D.Delete the printer. Re-create the printer by using DLC to connect to the JetDirect print device.
第3题:
You want to connect your Windows 2000 Professional computer to a new color laser printer. The printer is Plug and Play compliant. The printer is included on the current Hardware Compatibility List (HCL).
You are a member of the Sales organizational unit (OU). You want to share the printer with other users in the Sales Organizational Unit.
You plug the printer into the LPT port on the back of the computer. You then attempt to install the 32-bit application printer software that came with the printer. During the installation you receive an error message as shown in the exhibit.
What should you do before you share the printer to other users in the Sales OU?
A.Change the LPT port settings to enable legacy Plug and Play detection on your computer.
B.Change the LPT port setting to bidirectional in the BIOS on your computer. Then reinstall the printer software.
C.Connect the printer to another computer in the Sales Organizational Unit. Then install the device drivers for the printer.
D.Obtain and install WDM-compliant device drivers and printing software for the printer.
第4题:
You attempt to install a 32-bit application printer software that came with a new laser printer. During the installation, you receive the error message "failed to load WINPRINT.DLL. Specified module could not be found". What should you do get the printer functioning properly?()
第5题:
You are the network administrator for All network servers run Windows Server 2003. A server named PrintTK1 has a print device directly connected to the parallel port. The print device is shared for use by all users. Peter is the IT manager. Peter reports that his documents are often printed after documents submitted by other users. You need to ensure that Peter's documents take precedence over documents submitted for printing by other users. However, if a document is already printing, the printing must not be interrupted. What should you do?()
第6题:
You create two shared printers on a Windows 2000 Server computer in Ezonexam.com Ezonexam. One printer is shared as Admin, and the other printer is shared as Executive. Both printers are connected to the same print device. You set the priority of the Admin printer to 90 and the priority of the Executive printer to 50.
You want all users at the Ezonexam network to be able to send print jobs to either printer. However, you do not want the Executive printer to appear in the browse list when employees other than executives and administrative assistants create a new printer connection on their client computers.
What should you do?
A.Change the priority of the Executive printer to 99. Change the priority of the Admin printer to 10.
B.Change the share name of the Executive printer to Executive$. Manually reconfigure client computers that are already connected to the Executive printer.
C.Deny the Everyone group permission to access the Executive printer. Allow access to the users who are allowed to include the printer in their browse lists.
D.Install separate device drivers for the Executive printer. Configure NTFS permissions on the device driver files to allow access only to the System account and to users who are allowed to include the printer in their browse lists.
第7题:
A technician has added memory to a laser printer. To allow the printer driver software to use the additional memory, the amount of memory should be modified in:()
第8题:
You are the administrator of Ezonexam.com's network.
You want to connect your Windows 2000 Professional computer to a new TCP/IP based laser print device. The print device is Plug and Play compliant and is included on the current Hardware Compatibility List (HCL). When you attempt to create a new TCP/IP printer port you receive the following error message:
"Specified Port cannot be added. The port already exists."
You want to be able to use the new TCP/IP printer.
What should you do?
A.Modify the properties of the existing printer port to use the new print device.
B.Change the LPT port setting to bidirectional in the BIOS on your computer.
C.Change the LPT port setting to enable legacy Plug and Play detection on your computer.
D.Obtain and install the WDM-compliant device drivers and printing software for the printer.
第9题:
A user installs a laser jet printer on a Windows XP desktop. The user states that Windows XPgeneric printer drivers were used. When the user prints a document, the pages are printing out with random symbols, letters, and numbers. Which of the following should the technician do?()
第10题:
A printer takes a long time to print high-end graphics. Which of the following would be the FIRST action to take? ()