单选题What does the "allow performance information collection" button do in the Hardware Management Console （HMC） GUI？ （）A  It allows you to get inter partition reports， or cross partition performance activity.B  It will allow IBM remote technical support to

第1题：

A customer has a 32-core Power 770 with 4 AIX partitions and 2 IBM i partitions. They want to improve network availability and allow for concurrent maintenance. What will support the customer requirement at least cost?（）

• A、Build the logical partition infrastructure based on 6 or more VLANs.
• B、Build the logical partition infrastructure based on two or more IVEs.
• C、Build the logical partition infrastructure based on Partition Mobility.
• D、Build the logical partition infrastructure based on redundant VIO Servers.

第2题：

What does the "allow performance information collection" button do in the Hardware Management Console （HMC） GUI？ （）

• A、 It allows you to get inter partition reports， or cross partition performance activity.
• B、 It will allow IBM remote technical support to get performance information from the machine.
• C、 It is effective only on POWER6 and when Live Partition Mobility operations are planned.
• D、 It will start standard performance monitoring tools when an LPAR boots up， the output will be saved to the /etc/perf directory by default.

第3题：

Using the following information: Performance data from an existing system that a new system will replace; Performance estimates that anticipate future workloads; Micro-partitioning and logical partitioning implementations. Which of the following allows a technical sales representative to create a system design which can be imported into an HMC?（）

• A、IBMeConfig
• B、IBM Performance Monitor
• C、IBM Workload Estimator (WLE)
• D、IBM System Planning Tool (SPT)

第4题：

A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）

• A、In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.
• B、In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.
• C、In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.
• D、In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.

第5题：

Which one of these statements is true regarding hot pluggable PCIe and PCI-X slots in a Power 550?（）

• A、Cards can be added and then enabled via Hardware Management Console (HMC) GUI or command line. 
• B、The HMC allows access to the Advanced System Management Interface (ASMI), where the slots can be managed. 
• C、If the empty slot was already allocated to an LPAR, the LPAR can use the card after the cfgmgr script has been run. 
• D、The Hardware Management Console (HMC) GUI can guide a customer through the process of adding a card to an empty slot. 

第6题：

Which of the following procedures will allow an operator to access an LPAR console session?（）

• A、Open a vterm from the VIO graphical interface to get the partition console.
• B、Open a vterm from the ASMI graphical interface to get the partition console.
• C、Start an ssh session to the HMC. Use the vtmenu command to select the desired LPAR.
• D、Start an ssh session to the VIO. Use the vtmenu command to select the desired LPAR.

第7题：

IBM remote support for hardware maintenance is required for several mission critical Power 595 servers. The data center is very security conscious and does not allow internet access.  How should an administrator configure outbound connectivity of Electronic Service Agent？（）  

• A、VPN
• B、Modem
• C、Private LAN
• D、Pass-through systems

第8题：

In order for DLPAR operations to be possible, the RMC daemons on the Hardware Management Console (HMC) must communicate with the RMC daemons on all of the LPARs involved. How can the RMC daemons be restarted on the HMC, causing the least disruption?（）

• A、Run "/usr/sbin/rsct/bin/rmcctrl z" as hscroot. 
• B、Reboot the HMC, either through the GUI or via the command line. 
• C、Disable and re-enable RMC in the Firewall settings in the HMC GUI. 
• D、Select the "Partition Communication" checkbox in the LAN Adapter dialogue box.

第9题：

Which of the following interfaces is required to implement Workload Partition Mobility? （）

• A、 Workload Partitions Manager for AIX
• B、 Hardware Management Console （HMC） GUI
• C、 Integrated Virtualization Manager （IVM）
• D、 Advanced System Management Interface （ASMI）

第10题：

Which of the following is a feature of Integrated Virtualization Manager (IVM)? （）

• A、 It has a GUI interface for upgrading system firmware. 
• B、 It creates and manages AIX/Linux and VIOS type LPARs. 
• C、 It can be managed by the Hardware Management Console (HMC). 
• D、 It supports Live Partition Mobility on POWER6 systems and above.