via the accept x.x/y command
via TCP reachable physical interface addresses
via remote loopbacks with the local-address command
via UDP with the neighbor x.x.x.x command at the group level
第1题：
A. via the accept x.x/y command
B. via TCP reachable physical interface addresses
C. via remote loopbacks with the local-address command
D. via UDP with the neighbor x.x.x.x command at the group level
第2题：
A. The BGP session to the 10.3.3.3 neighbor is established, but the router has not received any BGP routing updates from the 10.3.3.3 neighbor.
B. The router is attempting to establish a BGP peering session with the 10.2.2.2 neighbor.
C. The router is attempting to establish a BGP peering session with the 10.1.1.1 neighbor.
D. The BGP session to the 10.3.3.3 neighbor is established.
E. The BGP session to the 10.2.2.2 neighbor is established.
F. The BGP session to the 10.1.1.1 neighbor is established.
第3题：
A. The local Web-filtering daemon is not enabled or is not running.
B. The integrated Web-filtering policy server is not reachable.
C. No DNS is configured on the SRX Series device.
D. No security policy is configured to use Web filtering.
第4题：
Which three statements about the Cisco MPLS TE Fast Reroute （FRR） process are true？（）
第5题：
On corporate network, hosts on the same VLAN can communicate with each other, but they are unable to communicate with hosts on different VLANs. What is needed to allow communication between the VLANs?（）
A.a router with subinterfaces configured on the physical interface that is connected to the switch
B.a router with an IP address on the physical interface connected to the switch
C.a switch with an access link that is configured between the switches
D.a switch with a trunk link that is configured between the switches
第6题：
R1 in ASN 1 with loopback1 address 1.1.1.1 needs to be configured with an iBGP connection to R2 with loopback2 IP address 2.2.2.2. The connection should use the loopbacks.Which o f the following commands is required on R1?（）
A. neighbor 1.1.1.1 remote- as 1
B. neighbor 2.2.2.2 remote- as 2
C. neighbor 2.2.2.2 update - source loopback1
D. neighbor 2.2.2.2 ibgp -multihop 2
E. neighbor 2.2.2.2 ibgp - mode
第7题：
A. The no auto - summary command has not been issued under the EIGRP process on both routers.
B. Interface E0 on router R1 has not been configured with a secondary IP address of 10.1.2.1/24.
C. EIGRP cannot exchange routing updates with a neighbor‘s router interface that is configured with tw o IP addresses.
D. EIGRP cannot form neighbor relationship and exchange routing updates with a secondary address.
第8题：
A. neighbor 200.16.1.2 remote-as 300
B. bgp-neighbor 200.16.1.2 remote-as 300
C. ebgp-neighbor 200.16.1.2 remote-as 300
D. neighbor 200.16.1.2 remote-as 300 connection-type ebgp
第9题：
A.a switch with a trunk link that is configured between the switches
B.a router with an IP address on the physical interface that is connected to the switch
C.a switch with an access link that is configured between the switches
D.a router with subinterfaces configured on the physical interface that is connected to the switch
第10题：
Hosts on the same VLAN can communicate with each other but are unable to communicate with hosts on different VLANs. What is needed to allow communication between VLANs（）。