Refer to the above exhibit. Why are the EIGRP neighbors for this router not learning the routes redistributed from OSPF?()

题目
Refer to the above exhibit. Why are the EIGRP neighbors for this router not learning the routes redistributed from OSPF?()

A. Redistribution must be enabled mutually (in both directions) to work correctly.

B. auto - summary causes the OSPF routes redistributed into EIGRP to be summarized; thus the OSPF network 116.16.34 is summarized to 116.3 4.0.0, which is already covered by the EIGRP protocol.

C. Default metrics are not configured under EIGRP.

D. Both routing protocols must have unique autonomous system numbers for redistribution to function correctly.

如果没有搜索结果或未解决您的问题,请直接 联系老师 获取答案。
相似问题和答案

第1题:

Refer to the exhibit. R1 and R2 have been configured to share routing information via EIGRP. What will be the result of the configuration section shown for R2? ()

A. Any routes learned by R2 from the interface tied to the 172.16.0.0 network will not be advertised to neighbors on the 192.168.2.0 network.

B. Only routes learned by R2 from the interface tied to the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network.

C. Only the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network.

D. All networks, except the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network .


参考答案:C

第2题:

Refer to the exhibit. Will redistribute d RIP routes from OSPF Area 2 be allowed in Area 1? ()

A. RIP routes will be allowed in Area 1 only if they are first redistributed into EIGRP.

B. Because NSSA will discard type 7 LSAs, redistributed RIP routes will not be allowed in Area 1.

C. Redistrib uted RIP routes will be allowed in Area 1 because they will be changed into type 5 LSAs in Area 0 and passed on into Area 1.

D. Redistributed RIP routes will be allowed in Area 1 because they will be changed into type 7 LSAs in Area 0 and passed on into Area 1.

E. Because Area 1 is an NSSA, redistributed RIP routes will not be allowed.


参考答案:E

第3题:

Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP.Which one of the following is true?()

A. R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.

B. For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.

C. For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.

D. No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.


参考答案:B

第4题:

Refer to the exhibit. Which three statements accurately describe the result of applying the exhibited route map?()

A. The map prohibits th e redistribution of all type 2 external OSPF routes.

B. All routes that do no match clauses 10 and 20 of the route map are redistributed with their tags set to 8.

C. The map prohibits the redistribution of all external OSPF routes with tag 6 set.

D. Th e map permits the redistribution of all type 1 external OSPF routes.

E. The map redistributes into EIGRP all routes that match the pfx prefix list and the five metric values?0000, 1000, 255, 1, and 1500.

F. The map prohibits the redistribution of all ty pe 2 external OSPF routes with tag 6 set.


参考答案:B, D, F

第5题:

Refer to the exhibit. Examine the partial configuration and the routing table excerpt. Which routes would be redistributed into OSPF area 1?()

A. 10.10.10.16/28 only

B. 10.10.10.16/28 and 10.10.10.64/26

C. 10.10.10.16/28, 10.10.10.64/26, and 172.16.10.0/24

D. 10.10.10.64/26 only


参考答案:D

第6题:

Refer to the exhibit and the partial configuration on router R2. On router R4 all RIP routes are redistributed into the OSPF domain. A second redistribu tion is configured on router R2 using a route map. Based on the configuration on router R2, which EIGRP external routes will be present in the routing table of R1?()

A. the routes originating from the RIP routing domain

B. the routes originating from the OSPF stub area

C. all OSPF inter and intra - area routes

D. all routes originating from RIP and OSPF routing domains


参考答案:A

第7题:

Refer to the exhibit. EIGRP has been configured on router D. Router C is performing mutual redistribution between EI GRP and OSPF. While verifying that the redistribution is functioning properly, you discover that while router C has all of the EIGRP routes in its routing table, router A does not have any routes from the EIGRP domain. What on router C may be the cause o f the problem?()

A. The no auto - summary command needs to be added under router eigrp 1

B. The subnets keyword was not included in the redistribute command under router ospf 1

C. The metric specified for the redistributed EIGRP routes is too large; m aking the EIGRP routes unreachable by router A

D. The default - information originate command needs to be added under router ospf 1

E. The administrative distance of either OSPF or EIGRP must be changed so that EIGRP has a higher administrative distanc e than OSPF


参考答案:B

第8题:

Refer to the exhibit. OSPF is configured on all routers in the network. Area 5 is configured as an NSSA areA. The RIPv2 routes are redistributed into the OSPF domain on router R5. What two types of LSAs will be originated by router R5?()

A. type 1 Router LSA

B. type 2 Network LSA

C. type 3 Network Summary LSA

D. type 4 ASBR Summary LSA

E. type 5 AS External LSA

F. type 7 NSSA External LSA


参考答案:A, F

第9题:

Refer to the exhibit. Which th ree commands should be used on router B1 to redistribute the EIGRP AS 10 routes into RIP?()

A. router rip

B. router eigrp 10

C. redistribute eigrp 10

D. redistribute rip

E. default - metric 10000 100 255 1 1500

F. default - metric 5


参考答案:A, C, F

第10题:

Refer to the exhibit. Which two statement s are correct?()

A. All the routes were redistributed into BGP from an IGP

B. All the routes were originated by BGP with the network command

C. All six routes will be installed in the routing table

D. Four routes will be installed in the routing ta ble

E. Two routes will be installed in the routing table


参考答案:A, D

更多相关问题