Router R1 learns two routes wit

题目

Router R1 learns two routes with BGP for prefix 200.1.0.0/16. Comparing the two routes, route 1 has a shorter AS_Path Length, smaller MED, the same Weight, and smaller Local PreferencE. Which of the following is true about Router R1's choice of best path for this prefix?()

  • A、Route 1 is the best route.
  • B、Route 2 is the best route.
  • C、The routes tie as best, but one will be picked to be placed in the routing table based on tiebreakers .
  • D、Neither route is considered best.
如果没有搜索结果或未解决您的问题,请直接 联系老师 获取答案。
相似问题和答案

第1题:

Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP.Which of the following answers lists an item that cannot be matched by route map fred?()

A. Subnet number

B. Next - hop router IP address of the route

C. Whether the route is an E1 or E2 route

D. The ro ute‘s tag

E. The number of router hops between the router and the subnet


参考答案:E

第2题:

Refer to the exhibit and the partial configuration on router R2. On router R4 all RIP routes are redistributed into the OSPF domain. A second redistribu tion is configured on router R2 using a route map. Based on the configuration on router R2, which EIGRP external routes will be present in the routing table of R1?()

A. the routes originating from the RIP routing domain

B. the routes originating from the OSPF stub area

C. all OSPF inter and intra - area routes

D. all routes originating from RIP and OSPF routing domains


参考答案:A

第3题:

On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH.Which of the following co mmands on router R1 list subnet 10.1.1.0/24?()

A. show ip route

B. show ip eigrp topology

C. show ip ospf topology

D. show ip eigrp topology 10.1.1.0/24


参考答案:A, C

第4题:

Routers R1 and R2 are EIGRP neighbors. R1 has been configured with the eigrp stub connected command. Which of the following is true as a result?()

  • A、R1 can learn EIGRP routes from R2, but R2 cannot learn EIGRP routes from R1
  • B、R1 can send IP packets to R2, but R2 cannot send IP packets to R1
  • C、R2 no longer learns EIGRP routes from R1 for routes not connected to R1
  • D、R1 no longer replies to R2's Query messages
  • E、R2n o longer sends to R1 Query messages

正确答案:C,E

第5题:

Router R1 is configured as shown below:router eigrp 100network 10.0.0.0eigrp stubBased on the information shown above, which two types of routes will be advertised?()

A. Receive - only

B. Stub

C. Static

D. Summary

E. Connected

F. Dynamic


参考答案:D, E

第6题:

Refer to the exhibit. Routers R1 and R2 have established a neighbor relationship and are exchanging routing information. The network design requires that R1 r eceive routing updates from R2, but not advertise any routes to R2. Which configuration command sequence will successfully accomplish this task? ()

A. R1(config)# router eigrp 1 R1(config - router)# passive - interface serial 0

B. R1(config)# access - list 2 0 deny any R1(config)# router eigrp 1 R1(config - router)# distribute - list 20 out serial 0

C. R2(config)# access - list 20 permit any R2(config)# router eigrp 1 R2(config - router)# distribute - list 20 in serial 0

D. R1(config)# access - list 20 permit any R 1(config)# router eigrp 1 R1(config - router)# distribute - list 20 in serial 0

E. R2(config)# access - list 20 deny any R2(config)# router eigrp 1 R2(config - router)# distribute - list 20 out serial 0

F. R2(config)# router eigrp 1 R2(config - router)# passive - interface serial 0


参考答案:B

第7题:

Refer to the exhibit. Routers R1 and R2 have been configured to operate with OSPF. Routers R1 and R3 have been configured to operate with RIP. After configuring the redistribution between OSPF a nd RIP on R1, no OSPF routes are distributed into RIP. What should be done to correct this problem? ()

A. The redistribution command should be reentered with the match route - type parameter included.

B. The redistribution command should be reentered wit h the route - map map - tag parameter included.

C. The redistribution command should be reentered with the metric metric - value parameter included.

D. Routes will first need to be distributed into another protocol, and then into RIP.


参考答案:C

第8题:

Router R1 refers to route - map fred when redistributing from EIGRP into OSPF. The entire route - map is listed next. Which of the following answers must be true based on the configuration as shown?()route - map fred deny 10match ip address oneroute - map fred deny 20match ip address tworoute - map fred permit 100

A. The third route map clause will allow any routes not already filtered by the first two clauses

B. R outes permitted by ACL "two" will be redistributed

C. Routes denied by ACL "one" will be redistributed

D. All routes will be filtereD


参考答案:A

第9题:

A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network()。

A.The router will use the static route.

B.The router will use the OSPF route.

C.The router will use the EIGRP route.

D.The router will load balance and use all three routes.


参考答案:A

第10题:

You administer a network that uses two routers, R1 and R2, configured as an HSRP group to  provide redundancy for the gateway. Router R1 is the active router and has been configured as  follows:   R1#configure terminal   R1(config)#interface fa0/0   R1(config-if)#ip address 10.10.0.5 255.255.255.0   R1(config-if)#standby 1 priority 150   R1(config-if)#standby preempt delay minimum 50   R1(config-if)#standby 1 track interface fa0/2 15   R1(config-if)#standby 1 ip 10.10.0.20   Which of the following describes the effect the standby preempt delay minimum 50 command will  have on router R1?()

  • A、 The HSRP priority for router R1 will increase to 200.
  • B、 Router R1 will become the standby router if the priority drops below 50.
  • C、 The HSRP priority for router R1 will decrease to 50 points when Fa0/2 goes down.  
  • D、 Router R1 will wait 50 seconds before attempting to preempt the active router.

正确答案:D

更多相关问题