A user plugged a cable between

题目

A user plugged a cable between two network jacks that attach to the same switch and caused a broadcast storm. Which of the following would have prevented the broadcast storm?()

  • A、Spanning tree
  • B、VLAN tagging
  • C、802.1x
  • D、Port mirroring
如果没有搜索结果或未解决您的问题,请直接 联系老师 获取答案。
相似问题和答案

第1题:

A user states that they are trying to project their laptop to a screen for a presentation. They have plugged the projector cable into their laptop, and turned the projector on, but no signal is found. Which of the following should the technician perform FIRST?()

A. Ensure the projector is receiving power

B. Verify the laptop is not running on battery

C. Toggle the function key for displays

D. Replace the projector cable with another


参考答案:C

第2题:

A user is trying to connect their new desktop to the network but is unable to get an IP address. The technician tests the cable and finds that there are too many open pairs. Which of the following wiring standards needs to be used in the replacement cable?()

  • A、568B
  • B、Crossover
  • C、569-A
  • D、607-A

正确答案:A

第3题:

Which type of cable should be used to make a connection between the Fa0/0 port on a router and the Fa0/0 port switch?

A.Rollover cable

B.Console cable

C.Crossover cable

D.Straight-through cable

E.Serial cable


正确答案:D
解析:Explanation:Straight-throughcablesareusedtoconnecthosttoswitch(orhub)androutertoswitch(orhub).

第4题:

Workstation A has been assigned an IP address of 192.0.2.24/28. Workstation B has been assigned an IP address of 192.0.2.100/28. The two workstations are connected with a straight-through cable. Attempts to ping between the hosts are unsuccessful. What two things can be done to allow communications between the hosts? ()

  • A、Replace the straight-through cable with a crossover cable.
  • B、Change the subnet mask of the hosts to /25.
  • C、Change the subnet mask of the hosts to /26.
  • D、Change the address of Workstation A to 192.0.2.15.
  • E、Change the address of Workstation B to 192.0.2.111.

正确答案:A,B

第5题:

Which type of cable should be used to make a connection between the Fa0/0 port on a router and the Fa0/0 port switch?()

  • A、Rollover cable
  • B、Console cab le
  • C、Crossover cable
  • D、Straight-through cable
  • E、Serial cable

正确答案:C

第6题:

A user is trying to connect their new desktop to the network but is unable to get an IP address.The technician tests the cable and finds that there are too many open pairs.Which of the following wiring standards needs to be used in the replacement cable?()

A. 568B

B.Crossover

C. 569-A

D. 607-A


参考答案:A

第7题:

A user reports that when the phone rings in their house the wireless on their laptops becomes disconnected. Which of the following BEST describes the issue?()

  • A、The cordless phones are plugged into same outlet as the router
  • B、The cordless phones are 5.8Ghz which interferes with wireless
  • C、The cordless phones are 2.4Ghz which interferes with wireless
  • D、The cordless phones are plugged into the RJ-11 jack

正确答案:C

第8题:

An administrator is using a protocol analyzer to monitor traffic between two servers. However, theonly traffic that appears is broadcast and traffic originating from the administrator‘s PC.Which of the following devices is the administrator plugged into? ()

A.Hub

B. Bridge

C. Switch

D. Router


参考答案:C

第9题:

What kind of cable should be used to establish a trunked line between two Catalyst 2950 switches?()

  • A、a straight-through cable
  • B、an EIA/TIA-232 serial cable
  • C、an auxiliary cable
  • D、a modem cable
  • E、a cross-over cable

正确答案:E

第10题:

Which two statements are true about broadband cable (HFC) systems?()

  • A、Cable modems only operate at Layer 1 of the OSI model.
  • B、Cable modems operate at Layers 1 and 2 of the OSI model.
  • C、Cable modems operate at Layers 1, 2, and 3 of the OSI model.
  • D、A function of the cable modem termination system (CMTS) is to convert the modulated signal from the cable modem into a digital signal.
  • E、A function of the cable modem termination system is to convert the digital data stream from the end user host into a modulated RF signal for transmission onto the cable system.

正确答案:B,D

更多相关问题