Area 0
NSSA
Totally stubby
Stub
第1题:
Refer to the exhibit. Router C was configured so that it could form an adja cency with three OSPF neighbors, one connected to each of its three physical interfaces. Which statement is correct about router C?()
A. It is configured and functioning correctly as an OSPF internal router.
B. It is configured and functioning correc tly as an ABR attached to stub area 4.
C. It is configured and functioning correctly as an ASBR attached to external area 4.
D. It is configured and functioning correctly as an ABR attached to totally stubby area 4.
E. It is not configured correctly to function as specified.
第2题:
A. All interfaces will be in area 0
B. The router will be an ABR with s1/0 in area 0 and f0/0 and 0/1 in area 1
C. The route r will be an ABR with s1/0 in area 0 and f0/0 and 0/1 in area 2
D. The router will be an ABR with s1/0 in area 0, f0/0 in area 1, and f0/1 in area 2
第3题:
某园区网采用 OSPF路由协议,参与 OSPF的网络地址是 169.111.0.0/16, Cisco路由器的正确配置是 ( ) 。
A) Rounter(config)# router ospf63
Rounter(config-router)# network 169.111.0.0 0.0.0.0 area 0
Rounter(config_router)# area o range 169.111.0.0 255.255.0.0
B) Rounter(config)# router ospf63
Rounter(config-router)# network 169.111.0.0 255.255.0.0 area 0
Rounter(config-router)# area o range 169.111.0.0 255.255.0.0
C) Rounter(config)# router ospf63
Rounter(config-router)# network 169.111.0.0 0.0.255.255 area 0
Rounter(config_router)# area o range 169.1-11.0.0 255.255.0.0
D) Rounter(config)# router ospf63
Rounter(config_router)# network 169.111.0.0 0.0.255.255 area 0
Rounter(config-router)# area o range 169.111.0.0 0.0.255.255
第4题:
A. On the ABR router ospf 10 area 3 stub
B. On all Area 3 routers router ospf 10 area 3 stub
C. On all Area 3 routers router ospf 10 area 3 stub no - summary
D. On the ABR router ospf 10 area 3 nssa
E. On the ABR rou ter ospf 10 area 3 stub no - summary
第5题:
You have implemented mutua l route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes.What should you verify to troubleshoot this problem?()
A. The border router is using a proper seed metric for OSPF
B. The border router is using a proper seed metric for EIGRP
C. The administrative distance is set for OSPF and EIGRP
D. The missing OSPF routes are present in the routing table of the border router
E. The subnet keyword on the border router in the redistribute OSPF command
第6题:
To make OSPF area 4 totally stubby, the following command was issued on the ABR in router configuration mode: area 4 stub.Which two things need to be done to finish making area 4 a totally stubby area?()
A. Apply the area 4 stub command to all routers in the area
B. On the ABR, use the area 4 stub command with the no - summary keyword
C. On the ABR, specify a default cost for the area with the area default - cost command
D. On the ABR, use the default - information originate command to inject a default route into area 4
E. Use the auto - cost command on each router in the area to automatically determine the cost to other OSPF areas
第7题:
You have implemented mutual route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one o f the OSPF routers within the OSPF routing domain, you are seeing some, but not all of the expected routes.Which two things should you verify to troubleshoot this problem?()
A. The border router is using a proper seed metric for OSPF
B. The border ro uter is using a proper seed metric for EIGRP
C. The administrative distance is set for OSPF and EIGRP
D. The missing EIGRP routes are present in the routing table of the border router
E. The subnet keyword on the border router in the redistribute EIG RP command
第8题:
输入哪条命令可以看到以下信息?( ) LS DataBase Type :Router Ls id :10.1.2.2 Ady rtr :1050 Len :72 Seq :80000008 Cksum (DC) Area Border Router Link count 4 Link id :192.168.2.1 Data :255.255.255.255 Metric:1562 Link id :10.1.2.2 Data :10.1.3.1 Type :Router Metric :1562 Link id :10.1.3.2 Data :255.255.255.255 Type :StubNet Metric :1562
A.show ip route
B.show ip ospf isa
C.show ip ospf database
D.show ip ospf interface
第9题:
TestKing.com is configuring the serial interface of a Cisco router to connect to the router of a new ISP. A full T1 is being used for the Internet connection. After issuing the show interface serial 0/0 command, it is observed that the interface is UP and the line protocol is DOWN.Which of the following commands could fix this problem?()
A. Border# copy running-config startup-config
B. Border(config)# no shutdown
C. Border(config-if)# encapsulation ppp
D. Border(config-if)# no cdp enable
E. Border(config-if)# ip routing
第10题:
A. stub
B. the autonomous system of an exte rior gateway protocol (EGP)
C. NSSA
D. totally stubby
E. the autonomous system of a different interior gateway protocol (IGP)
F. area 0