Ⅰ + Ⅱ
Ⅰ ~ Ⅲ
Ⅰ ~ Ⅳ
Ⅰ + Ⅱ + Ⅳ
第1题:
reduce fuel feeding
increase fuel feeding
keep original fuel feeding
be overspeed
第2题:
corrosion and grooving of exhaust valves
corrosion and gumming of the fuel injection pump
salt deposits in the exhaust manifold
slag deposits in the fuel injection equipment
第3题:
Re-circulating the fuel when the engine is stopped can______.①keep the fuel at the correct viscosity ②cool the injector
A.①
B.②
C.①②
D.neither ① nor ②
第4题:
Increase the cooling water flow to the engine
Secure or reduce fuel to that cylinder
Screw down on the pressure adjusting spring to decrease to decrease popping pressure
Readjust the injection timing
第5题:
reduce the fuel feeding of main engine of inner propeller
reduce the fuel feeding of main engine of outer propeller
firstly reduce the fuel of main engine of inner propeller, then reduce the fuel feeding of engine of outer propeller
reduce fuel feeding of two engines at the same time
第6题:
quantity of fuel injected is decreased
quantity of fuel injected will always be increased
start of injection is advanced
duration of injection will always be greater
第7题:
improper adjustment
contaminated fuel
kinked fuel lines
excessive engine vibration
第8题:
control fuel injection time more precisely
control fuel injection rate more precisely
meet the environmental requirements
meet high engine speed requirements
第9题:
BHP
MCR
IHP
MEP
第10题:
caused by retarded injection timing
caused by a mechanical defect in one cylinder
caused by high fuel injection pressures
normal for these conditions