单选题An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will n

题目

单选题

An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system. Which of the following is the MOST probable cause？（）

The BIOS is set with the wrong boot order.

The jumpers have not been set on the hard drive.

The hard drive is not compatible with the system board.

The boot.ini file needs to be modified.

如果没有搜索结果或未解决您的问题，请直接联系老师获取答案。

相似问题和答案

第1题：

An administrator installs a driver,reboots the DC, and logs in to configure the NIC. Once the administrator opens the NIC properties, the server bluescreens and now will no longer boot into Windows.Which of the following is the FIRST thing the administrator should do?（）

A. Boot into Last Known Good Configuration

B. Reseat the NIC

C. Boot into Safe Mode

D. Boot into Directory Services Restore Mode

参考答案：C

第2题：

After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）

A、Replace the second drive with a hot swappable one.
B、Swap the drive boot order in the BIOS
C、Make the second disk active under the disk management tool.
D、Rebuild the array using the hardware RAID tool at boot.

正确答案:B

第3题：

You are the administrator of a 12 SQL Server 2000 computers. These servers are located in company offices throughout the world.

You configure a multiserver job on the server in your company's New York City office. You configure this server as a master server, and designate the remaining 11 servers as target servers.

After the job completes successfully, you decide to set up a new SQL Server 2000 computer as the master server. The new server will be named JobMaster and the other 12 servers will be target servers.

You need to make the New York City server a target server instead of a master server. What should you do?

A．On the New York City server, defect all 11 target servers. On the JobMaster server, enlist the 12 servers as target servers.

B．On the JobMaster server, enlist all other servers as target servers.

C．On the New York City server enlist the JobMaster server as a target server. Transfer the multiserver jobs from the New York City server to the JobMaster server.

D．On the JobMaster server, enlist the New York City server as a target server. On the JobMaster server, enlist the other 11 servers as target servers. On the JobMaster server, defect the New York City server.

正确答案：A
解析：Explanation:Whensettingupanewmasterserver,theoldmasterservermustdefectallitstargetservers.Whenanewlydesignatedmasterserverreplacesanexistingmasterserver,thetargetserversmustbedefectedfromtheexistingmasterserver.Thetargetserverscanthenbeenlistedonthenewmasterserver.Thiscanincludetheexistingtargetserver.Note:InSQLServer2000EnterpriseEdition,multiserveradministrationisusedtoautomatetheadministrationofmultipleinstancesofSQLServer2000.Itcanbeusedtomanagetwoormoreserversandtoscheduleinformationflowsbetweenenterpriseserversfordatawarehousing.Withmultiserveradministration,theremustbeatleastonemasterserverandatleastonetargetserver.Amasterserverdistributesjobstoandreceiveseventsfromtargetservers.Amasterserverstoresthecentralcopyofjobdefinitionsforjobsrunontargetservers.Targetserversconnectperiodicallytotheirmasterservertoupdatetheirlistofjobstoperform.Ifanewjobexists,thetargetserverdownloadsthejobanddisconnectsfromthemasterserver.Afterthetargetservercompletesthejob,itreconnectstothemasterserverandreportsthestatusofthejob.WithSQLServer2000EnterpriseEdition,masterserverscanenlisttargetserversandcandefecttargetservers.IncorrectAnswers:B:ThissolutiondoesnotaddresstheneedtodemotetheNewYorkCityserver.Itisthusstillamasterserver.C:InthissolutiontheJobMasterserverisenlistedasatargetserveroftheNewYorkCityserver.ThissolutionalsodoesnotaddresstheneedtodemotetheNewYorkCityserver.Itisthusstillamasterserver.D:InthissolutiontheNewYorkCityserverisnotatargetserveroftheJobMasterserverasithasbeendefectedfromtheJobMasterserver.

第4题：

An administrator has removed a SATA hard drive from a failed server. Which of the following adapters would MOST likely be used by the administrator to transfer files from the drive to a laptop？（）

A、SATA to SCSI
B、SATA to HBA
C、SATA to USB
D、SATA to SAS

正确答案:C

第5题：

An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）

A、The hard drives were not plugged into the server correctly.
B、The controller driver is outdated and needs to be updated from the OEMs website.
C、The firmware for the server is too old and does not support the new RAID controller card.
D、The cable from the controller to the hard drive backplane is not connected.

正确答案:C

第6题：

AIX shows the boot order in the following output.hdisk0 hdisk1 blv=hd5 cd0.What will happen when the system administrator reboots the server?()

A.The server will boot from cd0

B.The server will boot from hdisk0

C.The server will boot into SMS mode

D.The server will boot from hdisk1

参考答案：D

第7题：

An administrator installs a driver,reboots the DC, and logs in to configure the NIC. Once the administrator opens the NIC properties, the server bluescreens and now will no longer boot into Windows. Which of the following is the FIRST thing the administrator should do?（）

A、Boot into Last Known Good Configuration
B、Reseat the NIC
C、Boot into Safe Mode
D、Boot into Directory Services Restore Mode

正确答案:C

第8题：

An administrator is experiencing availability issues on a Linux server. The administrator decides tocheck the server for an IP address conflict on the server. Which of the following commands should the administrator use?（）

A.traceroute

B.tracert

C.ifconfig

D.ipconfig

参考答案：C

第9题：

A Windows 2003 server has the operating system installed on a software RAID mirror. After a failure of one disk in the array the server will no longer boot up. The other drive is still functioning. Which of the following should be done to correct the issue？（）

A、 Edit the boot.ini file.
B、 Change to a hardware RAID solution.
C、 Recreate the array.
D、 Edit the active drive in the array.

正确答案:A

第10题：

An administrator attempts to install the latest security patches for an older server. When the administrator runs the patch installer, the install fails. The administrator tries again, and the installer fails again. Which of the following is the MOST likely reason for this?（）

A、The administrator improperly configured the virtual memory settings on the server.
B、The administrator is using incorrect patch switches for the install.
C、The administrator is trying to install security patches for software that is not installed.
D、The administrator is trying to install patches that require hard drive encryption on the server.

正确答案:C

单选题An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will n

题目

相似问题和答案

更多相关问题

相关内容