1
2
4
13
第1题:
A customer wants to consolidate storage from four IBM System p servers and one large IBM System i server. The customer does not have a SAN installed. The customer will require approximately 4 TB for System p and 3 TB for System i. The customer states that performance and isolation of the System i system is most important. Capacity, multi-path access, and replication functions are important for the System p servers. Which solution best satisfies the customer requirements()
第2题:
Which of the following IBM System Storage products supports a maximum of 64 GB of cache in astandard dual controller configuration?()
第3题:
A customer is acquiring a new IBM System Storage TS3500 Tape Library and requested to reuse four HP LTO-3 drives installed in a Sun L700 tape library to take advantage of the IBM multipath architecture.What action should the storage specialist take?()
A. requestTechline support for help configuring the TS3500 with merged IBM and non-IBM LTO tape drives
B. propose a TS3500 with IBM LTO-5 tape drives and explain the benefit of using IBM control path failover
C. propose a TS3500 with IBM LTO-5 tape drives and include a special feature code to include non-IBM LTO tape drives
D. propose a TS3500 with LTO-5 tape drives and include non-IBM LTO tape drive support in the installation services proposal
第4题:
A customer has an IBM System Storage DS5000 and needs to add more disk drives to the unit.There is no record of the configuration for this machine. How can the configuration be retrieved soan upgrade can be configured?()
第5题:
A customer would like the following configuration: One IBM DS5300 dual controller with 96 FiberChannel drives installed in 6 IBM DS5000 EXP enclosures, and 112 2 TB SATA drives installed inan additional 7 IBM DS5000 EXP enclosures. What is the minimum number of host kits required?()
第6题:
A customer has 4 EXP5000 expansion enclosures attached to an IBM System Storage DS5100 intheir production environment, and the same configuration in their disaster recovery environment.The customer removes the drives from the production environment and ships them to the disasterrecovery facility. What IBM technology feature gives the customer the ability to migrate drives fromone DS5000 to another DS5000 with data intact?()
第7题:
A customer is acquiring a new IBM System Storage TS3500 Tape Library and requested to reuse four HP LTO-3 drives installed in a Sun L700 tape library to take advantage of the IBM multipath architecture. What action should the storage specialist take?()
第8题:
A customer needs 40 TB for Tier 2 Information Lifecycle Management (ILM) data installed on the System z/VM. Their current data center is critically short of floor space. Which of the following would satisfy the customer requirement()
第9题:
While installing a new IBM System Storage DS5100 into a customer’s data center, it is discoveredthat the customer does not have enough available Fibre Channel ports on their switches. Which ofthe following should have been used to avoid this situation?()
第10题:
A customer has 6.5 TB with 146 GB 15k disk drives on an IBM System Storage DS8700. They want to add 15 TB using 300 GB 15k disk drives. The customer is concerned about performance and wants to know if the DS8700 has the performance capability. What is the appropriate way to model the performance()