问题：单选题The pSeries technical specialist is designing a two LPAR p5-570 with eight total processors. The system is a test system to run AIX 5.2. The customer has stated a preference for internal disks for the boot devices. The customer has said they may later need to run three or four LPARs without increasing the number of processors. What should the pSeries technical specialist tell the customer about the ability of the p5-570 to meet their requirements？（）A It will require additional SCSI adapters and I/O drawers or external disks to support more than two LPARs.B It has sufficient built-in SCSI controllers and disk enclosures to support four total LPARs by only adding the necessary additional disks.C It is unable to use internal disks for LPARs and therefore additional adapters I/O drawers or external disks must be used to support all LPARs.D It can support six LPARs with internal disks but will require special features， cables and an adapter to support the additional LPARs with internal disks.
查看答案
问题：单选题A customer is evaluating the purchase of a new p570 8-way Express to replace their current set of ten 2-way database and application servers that are more than five years old. In addition to savings potential in the areas of operating system and database charges， what other significant savings component should be highlighted？（）A Maintenance savings due to warranty on new machinesB Reliability savings of using one machine versus tenC Financial savings due to cash outlays now versus laterD Power savings even if the current power usage is unknown
问题：单选题During a presentation on the p5 machines， a customer asks the pSeries technical specialist a question regarding the differences between POWER4+ and POWER5. In addition to new advanced power management， SMT， and larger L2 and L3 caches in POWER5， which of the following describes some of the key improvements in POWER5？（）A Micro-Partitioning support and the L3 controller is now between L2 and main memory.B Dynamic partitioning support and the L3 controller is now between L2 and main memory.C Micro-Partitioning support and the L3 controller is no longer between L2 and main memory.D Dynamic partitioning support and the L3 controller is no longer between L2 and main memory.
问题：单选题A customer is very concerned about maintaining a competitive advantage through the use of state-of-the-art technology. Assuming all solutions meet the customer’s technical requirements， which solution should the IBM team propose to maximize customer satisfaction？（）A p690 with Dynamic LPARB Grid of SP switch-attached p5-550sC p690 with Advanced POWER VirtualizationD p5-570 with Advanced POWER Virtualization
问题：单选题A customer needs a system supporting four partitions， each with the following requirements： ？ 0.6 1.65GHz processors ？ 2GB memory ？ AIX 5.2 They also need the ability to grow the system in the future. Which pSeries system would be positioned best to meet this customer’s requirements？（）A p5-550 with the Advanced POWER Virtualization feature and AIX 5.2B p5-550 with the POWER5 processor technology and AIX 5.2C p5-570 with the Advanced POWER Virtualization feature and AIX 5.3D p5-570 with the POWER5 processor technology and AIX 5.2
问题：单选题A bank is interested in technology that will enhance competitiveness and flexibility in the financial trading market by harnessing the typically unused power of idle machines. The pSeries technical specialist should make the customer aware of which IBM offering？（）A IBM Grid ToolboxB IBM Capacity on DemandC IBM Cluster Systems ManagementD IBM Global Solutions Directory
问题：单选题A customer asks the pSeries technical specialist to recommend which remote access （SSH or Telnet） method to use. What question should the customer be asked to best determine the proper recommendation？（）A Is there a need for a PKI Management System？B Is there a need for end-to-end encryption？C Do they currently have a Kerberos domain in place？D Which clients are installed on their desktops -- SSH， Telnet or both？
问题：单选题What is one benefit of using the IBM eConfig configuration tool？（）A It warns users of parts availability constraints.B It provides a record of discounts used in the past.C It optimizes the adapter selection based on function and cost.D It provides validation of acceptable combinations of components.
问题：单选题A customer wants to receive automatic notification of critical software problems and fixes for their RS/6000 or eServer pSeries system. Which is the most appropriate services offering to recommend to them？（）A TechlineB ConsultlineC Operational Support Services - RS/6000 SystemWatchD Operational Support Services - Alert for pSeries
问题：单选题A customer has an 8-way p650 running an application for about 200 users. In the past， the requiredamount of memory and processors has increased proportionally to the number of new users. The customer plans to increase users by 10% each year for the next three years. Next year， a database will be added to the workload to support the users directly rather than being on a separate machine. What is the most likely result of this projected growth？（）A Disk usage will increase in proportion to memory.B The new database will demand much more memory.C Memory demand will increase 10% for the next year.D Processor demand will increase about 10% for the next year.
问题：单选题A customer’s new rack contains 12 x p655 servers. The customer currently has an HMC with one 128-port async adapter with a rack mounted 16-port RAN. The HMC is already attached to two pSeries p630s. What upgrades， if any， are needed to the HMC to support the new p655 servers？（）A No upgrades are needed.B Add another 16-port RAN.C Add an 8-port async adapter.D Add an additional 128-port adapter.
问题：单选题A customer has a p650 with a write-intensive database application. Recently the order entry team has complained about unusually slow response times. There have been no complaints from any other departments. Which of the following actions would most likely address the problem？（）A Double the number of processors.B Double the number of memory DIMMs.C Double the number of network adapters.D Double the number of SCSI buses and disks.
问题：单选题A customer needs an Oracle Database Server. Based on the customer’s sizing data， the IBM Oracle Competency Center has determined that the server requirements can be met with a 4-way p5-550 or a 4-way p5-570. If the pSeries technical specialist proposes a p5-570 versus a p5-550 system， what key differences should be pointed out to the customer？（）A The p5-570 is rack mounted but the p5-550 is not.B The p5-570 will provide more growth， but at a higher cost.C The p5-570 is 200-240 volt only and the p5-550 is 110 volt only.D The p5-570 needs a special feature to become a deskside machine.
问题：单选题The customer has recently installed a pSeries p5-570 with EMC attached disk storage. After installation， the customer complained that the disk access appeared to be too slow. How should the pSeries technical specialist best assist the customer？（）A Recommend the customer call EMC.B Recommend the customer call IBM hardware support.C Recommend the customer contact SupportLine.D Recommend the customer re-creates the volume groups.
问题：单选题When should Solutions Assurance Reviews take place？（）A Pre-order， pre-installationB Post-order， pre-installationC Pre-order， post completion sign-offD Pre-installation， post completion sign-off
问题：单选题A customer needs both a database and application server to communicate over a network. The new systems will be connected to the same network as the current IBM equipment with known IBM serial numbers. How could a pSeries technical specialist best determine which type of network card is appropriate， without making an additional call to the customer？（）A Use an Inventory Services retrieval to show adapter features.B Retrieve previous eConfig proposals to see what others had shown.C Call the Account Executive to ask what the customer has used in the past.D Query the Supportline problem record database for the customer and LAN keyword matches.
问题：单选题A pSeries technical specialist has just returned from an internal course for implementing Micro-Partitioning on the POWER5 range of servers. There were many handouts from the course. To ensure the rapid transfer of the newly acquired skill， what should the technical specialist do？（）A Make copies of the course material and deliver the course in full to the technical team.B Make copies of the course material and hand them out to the technical team for them to read.C Become the Micro-Partitioning expert within the organization and act as the sole knowledge base.D Make copies of the course material and prepare a concise overview of the course to deliver to the technical team.
问题：单选题A customer is putting together a high-performance computing cluster of p655 nodes. They need a total of 48 processors and want to get the best performance possible out of those systems. They are evaluating four options and have asked the pSeries technical specialist to recommend which one would provide the best performance based on total rPerf. Their workload may grow over time. Which of the following should the pSeries technical specialist recommend？（）A Twelve 4-way p655 nodes and add more as neededB Six 8-way p655 nodes and add more as neededC Six 4-way p655 nodes with four processors CoD on each node in case of growthD Three 8-way p655 nodes with eight processors CoD on each node in case of growth
