replace the NIC
install the latest SSU (System Setup Utility) version
upgrade the firmware on the NIC
assign the NIC a static IRQ in the SSU (System Setup Utility)
第1题:
An administrator is troubleshooting a problem on an application server, but has not determined the cause of the problem and is not able to replicate the problem. Which of the following should the administrator do prior to escalating the issue?()
第2题:
An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the administrator do FIRST to troubleshoot the problem?()
第3题:
You are installing Windows 2000 Server on a multiprocessor computer. The manufacturer has provided a customized Hardware abstraction layer (HAL) to use with the computer. The customized HAL is on a floppy disk.
You want to install the customized HAL designed for the computer. What should you do?
A.During the text mode portion of the Windows 2000 setup, install the customized HAL.
B.After the text mode portion of Windows 2000 Setup is complete, use the Recovery Console to copy the customized HAL to the system32 folder on the boot partition, and then continue Windows 2000 Setup
C.After the text mode portion of windows 2000 Setup is complete, use the Emergency Repair process to replace the existing HAL with the customized HAL, and then continue the windows 2000 Setup.
D.After the Windows 2000 Setup is complete, use Device Manager to scan for Hardware changes. When prompted, install the customized HAL.
第4题:
An administrator is configuring one server to monitor hardware level information on a second Windows server.Which of the following should be setup on the Windows server to allow the monitoring server to access this information?()
第5题:
A user is reporting that access to a file server is much slower than it has been. The system administrator completes a test of the server using a system monitoring tool and compares it to the previously taken baseline. The comparison shows that there are no significant changes in the use of system resources. Which of the following actions should be taken to resolve this user problem?()
第6题:
An administrator recently installed a known good RAID adapter. During boot up, the administrator is able to access the RAID configuration utility; however, when the administrator checks for the card in the operating system, it does not show up. Which of the following should the administrator do FIRST?()
第7题:
When experiencing video problems, which of the following should be performed FIRST to ensure that the monitor is not causing the problem? ()
第8题:
An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash.Which of the following should the administrator do FIRST to troubleshoot the problem?()
A. Check the backplane cabling.
B. Check the server BIOS.
C. Update the RAID controller firmware.
D. Install the latest hard drive firmware
第9题:
A customer’s support technician finished installing their new x366 server running Windows 2003 Enterprise Server and the IBM Director agent. The customer applied the latest BIOS and firmware drivers available on the Web for the system. The problem is that the x366 runs for a few minutes and then reboots itself. Which of the following should be checked first?()
第10题:
An administrator is running proprietary server software that requires services to be reconfigured every time the server is upgraded to the latest vendor version. Which of the following is the BEST solution to address this problem?()