The audio cable is not connected to the drive.
The ribbon cable is not connected.
The power cable is not connected.
The CD-ROM drivers are not installed.
第1题:
A customer receives a CD-RW disk from a computer vendor. The customer tries to read the disk in a computer with a 4X CD-ROM drive and is unable to read any information. The customer tries the CD-RW disk on a 32X CD-ROM drive and it reads correctly. What is the cause of this problem?()
第2题:
A PC is powered on and begins POST. The PC takes a long time when scanning for drives. The BIOS reports no hard drive can be found but the CD-ROM is identified. The technician knows that there are two hard drives on the primary EIDE controller and a CD-ROM on the secondary EIDE controller. Which of the following is the MOST likely cause of the problem?()
第3题:
A. It is a feature of new floppy drives.
B. The data cable was put on backwards.
C. A disk is being read by the floppy drive.
D. The new floppy drive is defective.
第4题:
After POST, the error message ‘Invalid system disk. Replace and press any key’ appears. Which of the following is MOST likely the cause?()
第5题:
A user is trying to boot a desktop PC from their A: drive. Which of the following devices is the userdescribing?()
第6题:
A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?()
第7题:
A technician replaced a floppy drive and now the front indicator light is consistently illuminated.Which of the following is the cause for this?()
第8题:
A PC is powered on and begins POST. The PC takes a long time when scanning for drives. The BIOS reports no hard drive can be found but the CD-ROM is identified. The technician knows that there are two hard drives on the primary EIDE controller and a CD-ROM on the secondary EIDE controller.Which of the following is the MOST likely cause of the problem?()
A. Both hard drives have the master jumper in place.
B. One hard drive is set as master and the other slave.
C. The hard drive data cable is reversed.
D. Both hard drives have the cable select jumper in place.
第9题:
A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on, the drive LED remains lit and an error message during power-on self test (POST) states, ’No Drive Present.’ Which of the following would MOST likely be the cause?()
第10题:
Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?()