A partial mesh totaling 100: one between the central - site router and each of the 100 branches.
A full mesh - (101 * 100) / 2 = 5050 - One neighborship between each pair of routers.
101 - One between each router (including the central site) a nd its nearby PE router.
None of the answers is correct.
第1题：
A. Router(config-if)# encapsulation frame-relay q933a
B. Router(config-if)# encapsulation frame-relay ansi
C. Router(config-if)# encapsulation frame-relay ietf
D. Router(config-if)# encapsulation frame-relay isl
E. None of the above
第2题：
The network administrator must complete the connection between the RTA of the XYZ Company and the service provider. To accomplish this task, which two devices could be installed at the customer site to provide a connection through the local loop to the central office of the provider (Choose two.)（）。
A.WAN switch
B.PVC
C.ATM switch
D.multiplexer
E.CSU/DSU
F.modem
第3题：
You are working with a client to deploy QoS on their Frame Relay WAN. They would like to be able to allow packets to cross the Frame Relay WAN but have them marked as discard eligible if they exceed the QoS policy.How would you accomplish this task?（）
A. Configure a class map that sets the DE bit so that the policy map can correctly apply a violate-action if the policy is exceeded.
B. Configure a service policy that sets the DE bit and apply it to the serial interface connected to the Frame Relay WAN.
C. Configure a policy map that has a burst-max action of setting the DE bit if the policy is exceeded.
D. Configure a policy map that has a violate-action to change the DE bit from 0 to 1.
第4题：
A company has a Frame Relay WAN with one central - site router and 100 branch office routers. A partial mesh of PVCs exists: one PVC between the central site and each of t he 100 branch routers. All routers use point - to - point subinterfaces and one subnet per PVC. Which of the following is true about OSPF in this design?（）
第5题：
The network administrator must complete the connection between the RTA of the XYZ Company and the service provider. To accomplish this task, which two devices could be installed at the customer site to provide a connection through the local loop to the central office of the provider (Choose two.)（）。
第6题：
A.HDLC
B.Ethernet
C.Token Ring
D.PPP
E.FDDI
F.Frame Relay
第7题：
When should traffic shaping be implemented on Frame Relay PVCs？（）
第8题：
The Testking Central and Remote offices are configured as shown below:The remote router can be successfully pinged from the central office but the remote users can‘t access the server at the central office.Based on the output above, what do you suspect is the cause of this problem?（）
A. The Frame Relay PVC is down.
B. The IP addressing on the Central/Remote serial link is incorrect.
C. RIP routing information is not being forwarded.
D. Frame Relay inverse-ARP is not properly configured.
第9题：
What does FRTP stand for？（）
第10题：
Which WAN connection requires a different interface than the standard interface provided in the Cisco Single-Site Secure Network Foundation deployment design？（）