face plates
bottom longitudinals
longitudinal deck beams
transverse deck beams
第1题：
Where should the GMDSS radio log be kept on board ship?______
A.In the Captain’s office
B.In the sea cabin
C.At the GMDSS operating position
D.Anywhere on board the vessel
第2题：
Bilge keels are fitted on ships to ______．
A.Assist in drydock alignment
B.Improve the vessel's stability
C.Protect the vessel from slamming against piers
D.Reduce the rolling of the vessel
第3题：
A tug is to assist in docking an oceangoing vessel on a hawser. The greatest danger to the tug is ______.
A.from the ship's propeller when making up aft
B.from being overrun if making up forward
C.hull damage while alongside passing a hawser
D.getting in a tripping position
第4题：
The main body of a vessel is the hull.
The main body of a vessel is the superstructure.
The main body of a vessel is the engine room.
The main body of a vessel is the poop.
第5题：
船舶的主体是船壳。（）
第6题：
During the Bareboat Charter Period the Vessel shall be kept insured by ______ at their expense against hull and machinery and war risks under the form of policy or policies attached．
A.the Merchant
B.the Carriers
C.the Charterers
D.the Owners
第7题：
Deck beams perform ______ of the following functions in the hull structure of a vessel．① They transfer deck loads to the frames；② They help to maintain the shape of the hull．
A.① only
B.② only
C.Both ① and ②
D.Neither ① nor ②
第8题：
When backing down with sternway，the pivot point of a vessel is ______.
A.about one-quarter of the vessel's length from the stern
B.at the bow
C.about one-third of the vessel's length from the bow
D.aft of the propellers
第9题：
船舶由船体和上层建筑组成。（）
第10题：
necessary to change the angle of list 1°at a given draft
necessary to change trim 1 cm at a given draft
pressure per square cm on the vessel's hull at a given draft
necessary to further immerse the vessel 1 cm at a given draft