Refer to the exhibit. Examine the partial configuration and the routing table excerpt. Which routes would be redistributed into OSPF area 1?()

Refer to the exhibit. OSPF is configured on all routers in the network. Area 5 is configured as an NSSA areA. The RIPv2 routes are redistributed into the OSPF domain on router R5. What two types of LSAs will be originated by router R5?（）

A. type 1 Router LSA

B. type 2 Network LSA

C. type 3 Network Summary LSA

D. type 4 ASBR Summary LSA

E. type 5 AS External LSA

F. type 7 NSSA External LSA

Refer to the exhibit and the partial configuration on router R2. On router R4 all RIP routes are redistributed into the OSPF domain. A second redistribu tion is configured on router R2 using a route map. Based on the configuration on router R2, which EIGRP external routes will be present in the routing table of R1?（）

A. the routes originating from the RIP routing domain

B. the routes originating from the OSPF stub area

C. all OSPF inter and intra - area routes

D. all routes originating from RIP and OSPF routing domains

A.Apply an import policy to OSPF; this will import the static routes into OSPF

B.Apply an export policy to protocol "static"; this will export the routes to other protocols.

C.Apply an import policy to the forwarding table; this will import the routes, allowing them to be forwarded to OSPF neighbors.

D.Apply an export policy to OSPF; this will export the static routes to your OSPF neighbors.

A.No dynamic interior routing protocol can summarize as shown

B.Unless configured otherwise, EIGRP would automatically summa rize the prefixes as shown in the exhibit

C.With this IP addressing scheme, EIGRP can be manually configured to summarize prefixes at the specified summarization points

D.The IP address design lends itself to OSPF Each summarizing router would be an ABR, summarizing to the next area in the address hierarchy

A. Redistributed ro utes will be tagged as external type 1 (E1) with a metric of 30.

B. Redistributed routes will be tagged as external type 2 (E2) with a metric of 20.

C. Redistributed routes will maintain their original RIP routing metric.

D. Redistributed routes will ha ve a default metric of 0 and will be treated as unreachable and not advertised.

E. Redistributed routes will have a default metric of 0 but will not be treated as reachable and will be advertised.

A. Only routes 10.0.1.0/24 will be sent out all interfaces.

B. Only routes matching 10.0.0.0/8 will be advertised out interfaces other than Ethernet 0.

C. Only routes matching 10.0.0.0/8 will be advertised out Ethernet 0.

D. Only routes matching 10.0.1.0/24 will be advertised out Ethernet 0.

E. Only routes 10.0.1.0/24 will be allowed in the routing table.

F. All rout es will be advertised out interfaces other than Ethernet 0.

A. RIP routes will be allowed in Area 1 only if they are first redistributed into EIGRP.

B. Because NSSA will discard type 7 LSAs, redistributed RIP routes will not be allowed in Area 1.

C. Redistrib uted RIP routes will be allowed in Area 1 because they will be changed into type 5 LSAs in Area 0 and passed on into Area 1.

D. Redistributed RIP routes will be allowed in Area 1 because they will be changed into type 7 LSAs in Area 0 and passed on into Area 1.

E. Because Area 1 is an NSSA, redistributed RIP routes will not be allowed.

Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）

A. Network B

B. Network A and Network B

C. Network A

D. neither Network A nor Network B

Refer to the exhibit. EIGRP has been configured on router D. Router C is performing mutual redistribution between EI GRP and OSPF. While verifying that the redistribution is functioning properly, you discover that while router C has all of the EIGRP routes in its routing table, router A does not have any routes from the EIGRP domain. What on router C may be the cause o f the problem?（）

A. The no auto - summary command needs to be added under router eigrp 1

B. The subnets keyword was not included in the redistribute command under router ospf 1

C. The metric specified for the redistributed EIGRP routes is too large; m aking the EIGRP routes unreachable by router A

D. The default - information originate command needs to be added under router ospf 1

E. The administrative distance of either OSPF or EIGRP must be changed so that EIGRP has a higher administrative distanc e than OSPF

A. 10.10.10.16/28 only

B. 10.10.10.16/28 and 10.10.10.64/26

C. 10.10.10.16/28, 10.10.10 .64/26, and 172.16.10.0/24

D. 10.10.10.64/26 only